8 Transport, entire system (HMS)
100_0101_tr_0008.fm
22
8
Transport, entire system (HMS)
Perform preparations
1. Switch the drive motor off with the ON/OFF switch.
2. Wait until the HMS come to a complete standstill.
3. Pull the plug out of the plug receptacle.
4. Disconnect the flexible shaft (including vibrator head) from the drive motor.
5. Allow the drive motor and vibrator head to cool down.
Transporting the equipment
1. Place the drive motor in or on a suitable transport means (operative position).
2. Wind up the power cable.
3. Place the flexible shaft (including the vibrator head) in or on the suitable transport means as well.
4. Secure all components against falling down or sliding away.
Shoulder strap for drive motor
For longer flexible shafts, please use a shoulder strap to facilitate work.
You can carry the drive motor with the shoulder strap if you have to change your position frequently.
WARNING
Improper handling can lead to injuries or serious damage to property.
Read and observe all safety instructions in this operator's manual, see chapter
Safety
.
WARNING
Hot vibrator head.
Contact may cause burns.
Only touch the vibrator head once the engine has cooled down.
Wear protective gloves.
NOTICE
Do to kink the power cable!
