manualshive.com logo in svg

Wacker Neuson KRAMER 5055e, Operator'S Manual


Share
Download
background image

BA 357-00 *  3.0 * 35700_04_Inbetriebnahme_01.fm

4-7

Putting into operation 4

Operator seat

Safety instructions

DANGER

Risk of electric shock from defective components or contact with the 
parts of the high-voltage system!

Causes serious injury or death.

►

The operator seat may only be folded forwards by specially trained 
personnel.

►

Before folding up the operator seat, turn off the machine, remove the 
ignition key and  disconnect the battery connector.

►

Do not touch damaged components or high-voltage system parts.

WARNING

Accident hazard when adjusting the operator seat during machine 
travel!

Can cause serious injury or death.

►

Adjust the operator seat only at machine standstill.

►

Lock the seat adjustment lever safely into place.

CAUTION

Health damages from incorrectly adjusted or defective operator seat!

Can cause injury to spinal column!

►

Adjust the operator seat to the operator’s weight before
putting the machine into operation or when changing operators.

►

Do not store any objects in the suspension
travel range of the operator seat.

►

Do not modify the operator seat
(for example by retrofitting parts other than original).

►

Contact an authorized service center immediately if the
seat does not function as usual (for example the seat suspension).

Summary of Contents for KRAMER 5055e





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KRAMER 5055e

Brands by name

Popular brands

Load more brands