manualshive.com logo in svg

Wacker Neuson KRAMER 5055e, Operator'S Manual


Share
Download
background image

7-78

BA 357-00 *  3.0 * 35700_07_Wartung.fm

7 Maintenance

Installing/removing wheels

Important safety instructions

WARNING

Crushing hazard due to tipping over of machine!

Serious injury or death can be caused by the raised machine tipping over.

►

Park the machine on level and firm ground.

►

Seal off the job site and ensure constant supervision of the machine.

►

To raise the machine, use only certified lifting gear with the required 
lifting capacity.

►

Use jack stands to secure and stabilize the machine.
Do not use the jack as a jack stand.

►

Do not turn on the machine if it is jacked up.

►

Have wheels changed by an authorized service center if possible.

WARNING

Accident hazard due to wrong tires!

Can cause serious injury or death

►

Use only tires that have been certified for the machine.

WARNING

Accident hazard due to loose wheel nuts!

Can cause serious injury or death

►

Check the wheel nuts for tightness after every wheel or tire change.

NOTICE

The threads on the wheel bolts can be damaged when fitting
the heavy wheels.

►

Use suitable auxiliary assembly tools, such as lifting devices or 
protective sheaths for the wheel bolts.

►

Have wheels changed by an authorized service center.

Summary of Contents for KRAMER 5055e





































































































































































































































































































































































































































Reviews:

No comments

Related manuals for KRAMER 5055e

Brands by name

Popular brands

Load more brands