Wacker Neuson KRAMER 5055e, Operator'S Manual

Page: 169 / 420

BA 357-00 * 3.0 * 35700_05_Bedienung.fm
5-43
Operation 5
Unlocking the attachment
Information
The attachment locked in the quickhitch is secured against unintentional
unlocking for safety reasons.
You can only unlock the attachment with both hands.
Information
In order to avoid damage to the mounting bore and attachment lock during
unlocking, follow the operation sequence exactly.
1. Disable the road-travel lock for the 3rd control circuit if it is still enabled.
To do this: slide the lock in rocker switch 72 downward and press the
rocker switch to position B .
➥
Indicator display C/1 in the digital display illuminates in the
indicating instrument.
➥
The 3rd control circuit is ready for operation.
2. Press and hold the touch button 59 in position B
3. Press switch 52 on the joystick to the right in travel direction at the
same time until the lock pins fully come out of the mounting bores of
the attachment.
4. First release switch 52 on the joystick, then release push button 59 .
5. Lower the attachment to level ground – see "Attachment on KRAMER
quickhitch" on page 5-56 , Attachment on SKID STEER quickhitch
(opt) on page 5-61 or Attachments for EURO quickhitch (optional) on
page 5-65 .
Fig. 134
72
A
B
1
52
59
B
C