Wacker Neuson IEC, Operator'S Manual

Page: 6 / 32

3 Introduction
6
100_0000_0003.fm
3 Introduction
3.1 Means of representation for this operator's manual
Warning symbols
This operator's manual contains safety information of the categories:
DANGER, WARNING, CAUTION, NOTICE.
They should be followed to prevent danger to life and limb of the operator or damage to equipment and
exclude improper service.
Instructions

This symbol indicates there is something for you to do.
1. Numbered instructions indicate that you have to carry out something in a defined se-
quence.

This symbol is used for lists.
3.2 Wacker Neuson representative
Depending on your country, your Wacker Neuson representative is your Wacker Neuson service, your
Wacker Neuson affiliate or your Wacker Neuson dealer.
You can find the addresses in the Internet at www.wackerneuson.com .
The address of the manufacturer is located at the beginning of this operator's manual.
3.3 Described machine types
This operator's manual is valid for different machine types from a product range. Therefore some figures
can differ from the actual appearance of your machine. It is also possible that the descriptions include
components which are not a part of your machine.
Details for the described machine types can be found in the chapter Technical data .
DANGER
This warning notice indicates immediate hazards that result in serious injury or even death.
 Danger can be avoided by the following the actions mentioned.
WARNING
This warning notice indicates possible hazards that can result in serious injury or even death.

Danger can be avoided by the following the actions mentioned.
CAUTION
This warning notice indicates possible hazards that can result in minor injury.
 Danger can be avoided by the following the actions mentioned.
NOTICE
This warning notice indicates possible hazards that can result in material damage.
 Danger can be avoided by the following the actions mentioned.
NOTES
Complementary information will be displayed here.