Wacker Neuson FUE Series, Operator'S Manual

Page: 10 / 48

3 Safety
10
3 Safety
3.1 Principle
State of the art
This machine has been constructed with state-of-the-art technology according to
the recognized rules of safety. Nevertheless, when used improperly, dangers to
the life and limb of the operator or to third persons or damage to the machine or
other materials cannot be excluded.
Proper use
The machine may only be used for the operation of internal and external vibra-
tors.
The machines to be connected must have the appropriate connection specifica-
tions (voltage, frequency, phase number).
Its proper use also includes the observance of all instructions contained in this
operator's manual as well as complying with the required service and mainte-
nance instructions.
Any other use is regarded as improper. Any damage resulting from improper use
will void the warranty and the liability on behalf of the manufacturer. The operator
assumes full responsibility.
Structural modifications
Never attempt to modify the machine without the written permission of the man-
ufacturer. To do so will endanger your safety and the safety of other people! In
addition, this will void the warranty and the liability on behalf of the manufacturer.
Especially the following are cases of structural modifications:
„
Opening the machine and the permanent removal of components from
Wacker Neuson.
„
Installing new components which are not from Wacker Neuson and not equiv-
alent to the original parts in design and quality.
„
Installation of accessories which are not from Wacker Neuson.
It is no problem to install spare parts from Wacker Neuson.
It is no problem to install accessories that are available in the Wacker Neuson
product range of your machine. Please refer to the installation regulations in this
operator's manual.
Do not drill into the housing, e.g. to install signs. Water could penetrate the hous-
ing and damage the machine.