Wacker Neuson ET35, Operator'S Manual

Page: 148 / 302

5-38
BA E16 en* 1.0 * E16_10_510.fm
5 Operation
Picking up an attachment
1. Hook up the quick coupler system A in the attachment bolt B .
2. Slightly screw in the quick coupler system A , lift the shovel arm until
the attachment is suspended about 30 cm (12 in) above the ground.
3. Extend the bucket cylinder so that the edge C of the attachment
touches the quick coupler system.
4. Screw in the quick coupler system A until the attachment lies
completely on the quick coupler system A due to its weight.
5. Shut off the engine and store the ignition switch key safely.
6. Screw socket wrench D clockwise until the bolts E completely engage
in the openings G of the quick coupler system A .
➥
The quick coupler system is locked.
7. Remove the socket wrench and perform a visual inspection.
8. Start the engine.
Fig. 178
A
B
C
Fig. 179
A
D
Fig. 180
E