Wacker Neuson ET18, Operator'S Manual

Page: 88 / 298

4-38
OM ET18/20/24 us 1.3 * et18_20_24i400.fm
4
Check lists
The checklists below are intended to assist you in checking and
monitoring the machine before, during and after operation. These
checklists cannot claim to be exhaustive.
If the answer to one of the following questions is NO, first rectify the cause
of the fault (or have it rectified) before starting or continuing machine
operation.
The checking and monitoring work listed below is described in greater
detail in the following chapters.
Start-up checklist
Check and observe the following points before putting the machine into
operation or starting the engine:
No. Question Page
✔
1.
Enough fuel in the tank? 7-26
2.
Water in water separator and fuel filter checked and
drained if necessary? 7-29
7-30
3.
Correct engine oil level? 7-32
4.
Coolant level OK? 7-34
5.
Correct oil level in the hydraulic oil reservoir? 7-42
6.
Water level in washer tank OK? 7-48
7.
Lubrication points greased? 7-6
8.
Tracks checked for cracks, cuts etc.? --
9.
Light system, signalling, warning and indicator lights
operational?
--
10.
Windows, mirrors, lights, steps, all pedals and control
levers clean?
--
11.
All control levers and pedals in neutral position? --
12.
Control lever base raised? 4-18
13.
Attachment safely locked?
5-35
5-43
14.
Tank cover closed?
Engine cover locked? 7-26
7-14
15.
Especially after cleaning, maintenance or repair
work: Rags, tools and other loose objects removed?
--
16.
Seating position adjusted correctly? 4-12
17.
Are all mirrors functional and adjusted correctly? 4-16
18.
Seat belt fastened? 4-13
19.
Before putting the machine into operation, ensure
that nobody is in the danger zone.
--