Wacker Neuson ET18, Operator'S Manual

Page: 209 / 298

OM ET18/20/24 us 1.3 * et18_20_24w710.fm
7-47
7
7.14 Heating, ventilation and air conditioning system
Checking/replacing the fresh-air filter
The fresh-air filter is located under the seat. Check it every 50 service
hours if it is used in a dusty environment and clean it with compressed air
or a mild soap solution if necessary.
Replace the fresh-air filter if it shows signs of cracks or damage, or if no
more air flows through it (clogging).
CAUTION
Injury hazard due to penetration of compressed air!
Can cause injuries.
►
Wear protective gloves and eye protection.
►
Do not aim the compressed air at the skin or at other people.
►
Do not use compressed air for cleaning your clothing.
Notice
The filter can be damaged by incorrect handling.
►
Do not use a damaged filter.
►
Ensure cleanliness when replacing the filter.
►
Do not brush the filter.
►
Only clean the filter with oil-free compressed air with a max. 2
bar (29 psi).
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Remove screws A with a suitable tool and remove cover B .
3. Check the filter.
➥
If the filter is damaged or clogged: replace the filter.
➥
If the filter is dirty: clean the filter.
Fig. 265: Checking the fresh-air filter
A
B