Wacker Neuson ET18, Operator'S Manual

Page: 195 / 298

OM ET18/20/24 us 1.3 * et18_20_24w700.fm
7-33
7
Adding engine oil
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Open the engine cover.
3. Clean the area around the oil filler cap with a lint-free cloth.
4. Open filler cap B .
5. Raise oil dipstick A slightly to allow any trapped air to escape.
6. Add engine oil.
7. Wait about 3 minutes until all the oil has run into the oil sump.
8. Check the oil level.
9. Add oil if necessary and check the oil level again.
10.Close filler cap B .
11.Push oil dipstick A back in as far as possible.
12.Close and lock the engine cover.
Information
Use a suitable container to collect engine/machine fluids as they
flow out and dispose of them in an environmentally friendly
manner.
Fig. 249: Adding engine oil
B