Wacker Neuson ET16, Operator'S Manual

Page: 72 / 248

4-12
BA ET16 de* 1.0 * et16i400.fm
4 Putting into operation
Adjusting the mirrors (option)
WARNING
Injury hazard to persons in the danger zone!
Persons in the danger zone are possibly not seen when reversing the
machine and may be injured. This can cause accidents with serious
injuries or death.
► Adjust the existing visual aids (for example the rearview mirrors)
correctly.
► Interrupt work immediately if persons enter the danger zone.
► Pay attention to the movements and changing positions of attachments
and persons.
WARNING
Accident hazard due to restricted field of vision on the job site!
Accidents resulting in serious injury or death can be caused by a restricted
field of vision.
► Do not allow anyone to stay in the danger zone.
► Use suitable visual aids if necessary (camera, mirrors, guide, for
example).
► Additional equipment or attachments must not be installed if they
impair visibility.
WARNING
Accident hazard due to incorrect adjustment of visual aids!
Incorrectly adjusted visual aids can cause serious injury or death.
► Before starting work, ensure that all visual aids are clean, functional
and adjusted in accordance with the instructions in this Operator’s
Manual.
► Immediately replace damaged or broken visual aids.
► Convex mirrors enlarge, reduce or distort the field of view.
► The operator must follow the national and regional regulations.
• Use safety-oriented ladders and work platforms for adjustment work on
the machine.
• Do not use machine parts or attachments as a climbing aid.
• Set the boom to travel position before adjusting the mirrors.