Wacker Neuson ET16 Operator'S Manual Download Page 197

Page: 197 / 248

BA ET16 de* 1.0 * et16w700.fm

7-29

Maintenance 7

7.8

Engine lubrication system

Important information regarding the engine lubrication system

NOTICE

Possible engine damage due to incorrect engine oil level.

►

The oil level must be between the MIN and MAX marks.

NOTICE

Damage due to wrong engine oil.

►

Use engine oil according to

Fluids and lubricants

list.

►

Have the oil changed only by a Wacker Neuson service center.

NOTICE

Damage due to adding engine oil too quickly.

►

Add the engine oil slowly so it can go down without entering the intake
system.

Information

Check the oil level once a day. Wacker Neuson recommends checking
before starting the engine. Check the oil level not less than five minutes
after stopping the engine.

Summary of Contents for ET16

























































































































































































































































Search results

Summary of Contents for ET16

Reviews:

Wacker Neuson ET16, Operator'S Manual, Page: 197 / 248

Search results

Summary of Contents for ET16

Reviews: