Wacker Neuson ET12 02, Operator'S Manual

Page: 194 / 286

7-16
BA ET18, 20, 24 en* 1.5 * et18_20_24w700.fm
7 Maintenance
2. Press bow clip B downward and hitch it.
3. Position lock D opposite notch B .
4. Press side cover C toward the machine with both hands until it
engages with an audible click.
5. Close the engine cover.
Cover on the right
Opening:
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Unscrew both screws A .
3. Fold down the side cover.
4. Remove the side cover.
Closing:
1. Hitch the side cover on the lower side into both shackles B .
2. Raise the side cover.
3. Tighten both screws
A .
Fuse box
Opening:
1. Stop and park the machine. Stop the engine. See “Preparing
lubrication”.
2. Open the cover on the left.
3. Slacken screws
A and lower the cover.
Closing:
1. Install the cover and tighten screws A .
2. Close the side cover.
Fig. 238Hitching the side cover
B
C
D
Fig. 239Opening the cover on the right
A
Fig. 240Cover on the right
B
Fig. 241Open the fuse box
A