Wacker Neuson ET12 02, Operator'S Manual

Page: 137 / 286

BA ET18, 20, 24 en* 1.5 * et18_20_24b510.fm
5-33
Operation 5
Lifting gear applications
DANGER
Crushing hazard due to tipping over of machine.
Causes serious crushing or injury resulting in death.
► Observe chapter Safety/Safety instructions regarding lifting gear
applications .
► Do not exceed the weight specified in the stability table.
► If a bucket or attachment (for example a hammer) is installed, the
weight of the attachment must be subtracted from the weight specified
in the table.
► Use the machine for lifting gear applications only if the mandatory
lifting gear (for example a load hook) and safety equipment (for
example optical and acoustic warning devices (safe load indicator),
stability table, hose burst valve) is installed, functional and enabled.
► Functional check of safe load indicator (see chapter “Safe load
indicator”).
► Do not tilt the upper carriage (Vertical Digging System option).
► The telescopic travel gear must be extended (option).
NOTICE
If the specified weight is exceeded, danger of damage to property due to
tipping over of machine.
► Do not exceed the weight specified in the stability table.