Wacker Neuson E13-01, Operator'S Manual, Page: 120 / 252

5-30
BA EZ17 en* 1.1 * ez17b510.fm
5 Operation
Lifting gear applications
Lifting gear applications are procedures involving raising, transporting and
lowering loads with the help of lifting and fastening gear.
DANGER
Crushing hazard due to tipping over of machine!
The machine causes serious injury or death when it tips over.
► Do not exceed the weights indicated in the load diagrams.
► Subtract the weight of the attachment from the weight specified in the
relevant load diagram.
► Use the machine for lifting gear applications only if the mandatory
lifting gear and safety equipment is installed, functional and enabled.
► Only work with completely extended telescopic travel gear
WARNING
Risk of machine tipping over due to failure to pay attention to the
safe load indicator!
Serious injury or death can be caused by a machine tipping over.
► Reduce the load until both the buzzer and the indicator light on the
display element go out.
► Observe the load diagrams.
WARNING
Accident hazard due to switched-off or malfunctioning safe load
indicator!
Serious injury or death can be caused by a machine tipping over.
► Switch on the safe load indicator during lifting gear applications.
► Operate the machine only with an intact safe load indicator.
NOTICE
Machine damage due to a machine tipping over if the weight in the load
diagram is exceeded.
► Do not exceed the weights indicated in the load diagrams.