Wacker Neuson DV60, Operator'S Manual, Page: 66 / 212

4-4
BA D24 en/us* 1.0 * D24_1_0_400.fm
4 Putting into operation
Seat adjustment
WARNING
Danger of accident due to seat adjustment during vehicle operation!
Adjusting the seat during vehicle operation can cause serious injury or
death.
► Adjust the seat before putting the machine into operation.
► Ensure that the levers are locked into place.
WARNING
Spinal cord injury due to incorrect seat adjustment!
An incorrect weight adjustment can cause injury to the spinal cord.
► Ensure that the seat is correctly adjusted to the operator’s weight
before vehicle travel or operation.
► Machine operation is prohibited for operators weighing less than 50 kg
(110 lbs) or more than 140 kg (309 lbs).
Information
The seat can be fitted with an optional operator presence switch. The
traveling drive shifts to neutral as soon as the operator is not seated for
more than 5 seconds.
Functional check of operator presence switch (option)
Perform a functional check once a day.
1. Sit down on the seat.
2. Start the vehicle.
3. Press the service brake.
4. Put forward-reverse control
A in position 1 and check whether vehicle
drives.
5. Set the forward-reverse control A to position N .
6. Remove the weight off the seat for at least five seconds.
7. Carefully bring forward-reverse control
A to position 1 .
➥
The machine must not start moving.
Contact a Wacker Neuson service center immediately if the machine
starts.
Fig. 63
Fig. 63
1
A
N