Wacker Neuson DT10, Operator'S Manual

Page: 14 / 120

1-6
BA DT10 en - Edition 1.5 * * dt10b110.fm
Introduction
1.5 EC Declaration of Conformity for vehicles with a CE mark on the type label
The indications specified above correspond to the existing information at time of going to press. They have possibly changed in the mean-
time (refer to the original declaration of conformity supplied with the vehicle). Applies to EU countries, and countries with legislation similar
to that of the EU. Applies to all vehicles with CE marks that have not been modified without authorization since the product was placed on
the market.
Manufacturer
Wacker Neuson Linz GmbH, Flughafenstr. 7, 4063 Hörsching, Austria
Product
Conformity assessment procedure
-
Notified body involved in procedure
-
Directives and standards
With this document we declare that this product corresponds to the applicable regulations of the following directives
and standards:
2014/30/EG, 2000/14/EU, 97/68/EU, EN ISO 12100:210;
EN 474-1:2006 (up to 5.5.8.1, 5.8.2, 5.9, 5.19.1), EN 474-6:2010 (up to 5.7.3.3),
Authorized representative for the compilation of technical documentation
Annette Ortmayr, Team Leader Technical Documentation
Flughafenstr. 7
4063 Hörsching
Austria
Machine designation Compact Dumper
Machine model D19-01
Trade name DT10
Serial number xxxxxxxx
Engine / output kW Z482/9.7
Measured sound power level dB(A) 101
Guaranteed sound power level dB(A) 101
Johannes Mahringer,
Managing director
EC Compliance Statement