Wacker Neuson DT10, Operator'S Manual

Page: 13 / 120

BA DT10 en - Edition 1.5 * dt10b110.fm
1-5
Introduction
1.3 Brief description
The DT10 dumper is a self-propelled work machine.
Get informed on and follow the legal regulations of your country.
The main components of the vehicle are:
• Tracked travel gear
• Control stand with integrated oil and fuel tanks
• Internal combustion engine
• Model DT10: two-cylinder diesel engine
• Model DT10: two-cylinder diesel engine that corresponds to the EPA tier-4 regula-
tions (optional)
• Tipping trailer
• High-tip skip (option)
• Self-loading equipment (option)
• Front skip (option)
• Swivel skip (option)
• Skip for lightweight load (optional)
Definition of operator’s control stand
The dumper’s control stand is the:
• Foothold
• Control stand
The vehicle may only be operated from the running board and control stand.
Danger
!
The operator must not lean or reach outside the dimensions of the vehicle.
This applies in particular to their feet! Otherwise –
Accident hazard!
☞ Stand on the foothold ensuring that neither your feet nor other limbs pro-
trude beyond the dimensions of the vehicle!
Danger
!
The operator must always firmly hold onto the handle of the control stand with
both hands! Otherwise –
Accident hazard!
☞ The operator is subject to high acceleration forces in particular when start-
ing vehicle travel!
1.4 Regulations
Requirements to be met by the operator
Earth moving machines may be driven and serviced only by persons who meet the follow-
ing requirements:
• 18 years or older
• Physically and mentally suited for this work
• Persons have been instructed in driving and servicing the earth moving machine and
have proven their qualifications to the contractor
• Persons are expected to perform work reliably.
They have been appointed by the contractor for driving and servicing the earth moving
machine.
Observe the legal regulations of your country.
Fig. 4: Control stand