Wacker Neuson DPU 3050H, Operator'S Manual, Page: 43 / 64

9 Maintenance
43
9.2.6 Changing the engine oil
Note: The work area should be covered with a waterproof sheet to protect
the floor (protection of the environment).
Note: Drain the oil while the engine is still hot. This ensures that the oil will
be drained quickly and completely.
1. Place the machine upright on a flat surface.
2. Bring the engine to a hand warm temperature, either by letting it cool down
or running it until it is warm.
3. Switch off the engine.
4. Unscrew and remove the oil level dipstick.
5. Screw the oil drain hose onto the oil change valve.
Collect the oil with a suitable container and dispose of properly.
6. Top up oil via the filler neck and check oil level.
See the chapter Technical data for oil quantity and oil specification.
7. Unscrew oil drain hose and screw on oil change valve.
8. Screw in the oil level dipstick and tighten it by hand.
Note: Dispose of the used oil in accordance with the applicable regulations.
Item Designation Item Designation
1 Oil level dipstick 3 Oil drain hose
2 Oil change valve