BA 1404 en – Edition 2.7 * 1404b210.fm
2-7
Safety instructions
Cabin/canopy
Notice!
• Machine operation is only allowed with a correctly installed and intact cabin or
correctly installed and intact canopy.
• For additional protection, only use correctly installed and intact Wacker Neuson
protective structures that have been released for the machine.
The cabin/canopy have been specially designed for protection in case of an accident.
• ROPS/TOPS tested canopy (open version).
• ROPS/TOPS tested cabin (closed version/option).
• FOPS-protective structure (optional) for driver cabin/canopy; Protective structure
against falling objects.
• Shatter protection (optional) for canopy; Protective structure against frontal flying
fragments.
Explanation of abbreviations
ROPS:
Roll Over Protective Structure
TOPS:
Tip Over Protective Structure
FOPS:
Falling Objects Protective Structure
2.7 Checks when reversing the machine
• Careful when reversing the machine – accident hazard!
• Persons in the blind spot of the machine cannot be seen by the operator.
• Ensure that nobody is within the danger zone of the machine when changing the driving
direction!
• Use the rearview mirrors to reverse with the machine.
2.8 Applications with lifting gear
Applications with lifting gear are understood as procedures involving raising, transporting
and lowering loads with the help of slings and load-securing devices (ropes, chains, for
instance). In doing so, the help of persons is necessary for securing and detaching the
load. This applies, for example, to lifting and lowering pipes, shaft rings or containers.
• No applications with lifting gear!
Summary of Contents for 1000164553
Page 8: ...1 6 BA 1404 en Edition 2 7 Ba1404en2_7IVZ fm Table of contents...
Page 23: ...BA 1404 en Edition 2 7 1404b110 fm 1 13 Introduction Overview of safety labels...
Page 171: ...BA 1404 en Edition 2 7 1404b560 fm 5 43 Maintenance DIN 51 502 DIN 51 825 1000156007 1...
Page 172: ...5 44 BA 1404 en Edition 2 7 1404b560 fm Maintenance...
