LB 1
Operation
wc_tx000741gb.fm
17
Continued from the previous page.
6. Disconnect the snaps and remove the burst cage
(c)
.
7. With a gloved hand, unscrew the bulb
(d)
and remove it.
Installation
Follow the procedure below to install a new bulb.
1. With a gloved hand, screw the bulb into the light fixture.
NOTICE:
Avoid touching the bulb with your bare hands. Oils from your skin may
shorten bulb life.
2. Re-install the burst cage.
3. Reconnect the lower and upper portions of the balloon with the hook-and-loop
tape (Velcro
®
).
The procedure to change the bulb is now complete.