LB 1
Operation
wc_tx000741gb.fm
15
2.6
Inspecting and Cleaning
Inspecting
Inspect the following components each time you unpack the LB 1:
Make sure that no electrical cords are damaged. If any electrical cords are
defective or damaged or if the grounding plug is broken or shorted-out, have a
specialist repair it.
Inspect the bulb for cracked glass.
Make sure the bulb is properly screwed into the socket.
Inspect the lower and upper covers for damage. Do not operate the balloon
with a defective cover.
Cleaning
Follow the instructions below for cleaning the machine:
If the balloon should become damp during use, let it dry thoroughly before
returning the balloon to its transport cylinder. Otherwise, it will become musty in
storage.
If the cover (upper/lower) is dirty, wipe it with a weak solution of liquid dish soap
and water.
NOTICE:
Do not use solvents to clean the balloon cover!
NOTICE:
Never use a pressure washer to clean the machine.