Chapter 3, Operating Instructions: Operating Features
E.H. Wachs
Part No. 29-MAN-00, Rev. A
27
Figure 3-8. The wire channel covers on the arm
assemblies are secured by locking latches. Release the
latch and swing the cover open to remove or install
the cutting wire.
Figure 3-9. The idler wheel covers are secured in
place by the wire channel covers. Close the wheel
cover, then close and secure the wire channel cover.
Arm Assemblies
The arm assemblies swivel and can be set in two posi-
tions—closed for storage and for installing the cutting wire,
