MIO-R45XRFR4836 Rev E
G&B Specialties Inc. 535 West 3
rd
Street, Berwick, PA, USA Tel: (570) 752-5901 Fax: (570) 752-6397
US Field Service: 570-441-6988; CAN Field Service 570-854-0482; www.rafna.com
-1-
I
NSTALLATION OF
R-450
R
OTATING
R
EAR
R
AILGEAR
K
IT
Ford F-450/550 All Models
I
NSTALLATION
S
AFETY
P
RECAUTIONS
If any installation problems are encountered, please call G&B Specialties, Inc. for
technical assistance before continuing with the installation process.
Failure to heed to any of the following warnings could result in severe bodily
injury and/or equipment damage.
Read and understand this manual completely before attempting installation
and operation of the equipment.
Installation and operation instructions provided below only address the G&B
Specialties railgear equipment. Applicable railway company procedures and
policies must be adhered to.
Before performing any work under the vehicle or railgear, ensure that the en-
gine is turned off and the parking brake is set.
Beware of all pinch points on the railgear and keep all parts of the body clear.
Always disconnect the vehicle’s battery when welding on the vehicle or railgear
in order to protect the vehicle’s electrical system.
Railway company rules governing rail travel must be observed at all times.
Ensure that the position and function of all railgear controls are known before
attempting operation.
Ensure the railgear is locked in road position before starting road travel.
Ensure all body parts and loose clothing are clear of any moving parts of the
equipment.
If misalignment of the railgear equipment is indicated, promptly perform the
alignment procedure.
Before performing any work under the vehicle or railgear, ensure the engine is
turned off and the parking brake is set.
Never operate the vehicle if the Gross Vehicle Weight Rating (GVWR), Gross Ax-
le Weight Rating Front or Rear (GAWR), or the wheel or tire load ratings are
exceeded.
!
