WABCO TAILGUARD, System Description

Page: 42 / 64

42
Operation Operation
9 .4 .1 Display
Objects within the monitored area are signalled by colour bars on the Trailer
Remote Control.
Each lit bar represents a field of 50 cm in length in which the object is located.
„
Red (top 3 bars): 0 to 150 cm
„
Yellow (central 3 bars): 150 to 300 cm
„
Green (bottom 3 bars): 300 to 450 cm
In close proximity (red LEDs) the following also applies: Each LED has 2
states - constant and flashing. The permanently lit LED represents the distance
of 25 cm, the flashing one 50 cm.
9 .4 .2 Acoustic warnings
!
Acoustic warnings are not permitted as exclusive means of indicating distance
because system faults are not clearly identifiable.
DISTANCE TO OBJECT ACOUSTIC SIGNAL
> 3 m from
3 m - 1.5 m 2 Hz
1.5 m - 0.75 m 4 Hz
< 0.75 m – automatic braking 6 Hz
< automatic (defined) braking distance permanently on
9 .4 .3 Adjusting the buzzer volume in the Trailer Remote Control
– Select volume control by pressing button B (> 2 seconds)
until the +/- buttons flash.
– Press the +/- buttons to adjust the volume.
9 .4 .4 Deactivating TailGUARD via Trailer Remote Control
– Press button C.
Ö
TailGUARD is deactivated until the reverse gear is engaged again.