OptiFlow™ SideWings
Confi gurations
3 Confi gurations
In this chapter the different confi gurations of OptiFlow SideWings are
described.
Long
This confi guration covers the side of the trailer from the landing legs to the
end. This type of confi guration is usually installed to satisfy full functionality
as well as aesthetic demands.
Open Wheel
This confi guration is meant to give access to steering axle trailers. Therefore
the wheels will have enough space to move freely without any interference
from the SideWings.
Standard
This confi guration is for trailers that have regular access to loading platforms
or ramps. The main difference to a standard “Long SideWing” setup is the
absence of a panel at the back, giving space for accessories (e.g. spare
wheels) and avoiding possible collisions during use.
Summary of Contents for OPTIFLOW SIDEWINGS
