W6 N 707D free-arm Manual Download Page 81

Page: 81 / 91

Manual • Cover W6 N 707D Free Arm • 29/10/2019 • 1.0 • GBR

Troubleshooting and tips & tricks

Help

Troubleshooting

Effect

Solution

Fabric puckers

Reduce the thread tension. See “Operating

elements” > “4 thread tension dials” (page 24)

Check whether the thread has become

entangled in the thread guide path
Use high-quality, lint-free W6 WERTARBEIT

thread
Change the differential feed

Fabric jams

Check whether the thread has become

entangled in the thread guide path
The fabric is too thick. It is not suitable for

overlocking with a cover

Machine is not running Connect the machine to the mains.

Is the cable faulty?

12.2 Tips & tricks

Sometimes minor user errors can lead to the sloppy appearance of seams

or sewing problems (broken threads, loops, jamming, catching etc.).
W6 Wertarbeit offers you the following assistance (please work through it

systematically at your own pace. Stick precisely to the order of the tips as

each tip provides the foundation for the next):

12.2.1

Checking the thread quality

Does your thread fluff up or break very quickly? This indicates poor-quality

thread or that the thread is old (layered). Poor thread may damage the

thread tensioning system of your cover in the long term.
Check the quality of the thread by pulling strongly on the thread with your

thumbnail and index fingernail.

Summary of Contents for N 707D free-arm




























































































Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands

W6 N 707D free-arm, Manual

Search results

Summary of Contents for N 707D free-arm

Reviews:

Related manuals for N 707D free-arm

Brands by name

Popular brands