W6 N 2000 Exklusive Manual Download Page 98

Page: 98 / 220

Utility stitches

Using a Pattern

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

Begin sewing.

The fabric is fed evenly, one stitch at a time. The sewing machine
stops automatically.

Lift the presser foot and slide the fabric about 2 or 3 centimetres further.

Repeat Steps 2 to 4 until the basting am has been sewn.

The basting seam has been sewn

11.3.3

Zigzag stitch - Program 07

Standard foot, Super-Stretch Needle 90 or 75

Your sewing machine is able to sew a large variety og zigzag stitches.

You may adjust the stitch lenght and stitch width at any time.

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands