W6 N 2000 Exklusive Manual Download Page 56

Page: 56 / 220

Removing a W6 plastic bobbin from the black hook race

What do I do with the lower thread?

Manual • Sewing machine W6 N 2000 Exklusive W6 N 2000 Exklusive • 27/04/2018 • 1.0 • GBR

To open the plastic hook cover, slide the black fastener to the right and
remove the hook cover.

Remove the plastic bobbin from the hook race.

Using the right-hand index finger, grip beneath the edge of the
bobbin and lift the bobbin out.

The plastic bobbin has been removed from the hook race.

W6 Tip

Moreover, W6 WERTARBEIT offers the following options on its website for
free.
Please access our website using www.w6-wertarbeit.eu and select

Help /

W6 N 2000 Exklusive

: Optimal Threading (approximately 4 minutes’

duration)

Summary of Contents for N 2000 Exklusive





























































































































































































































Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands

W6 N 2000 Exklusive, Manual

Search results

Summary of Contents for N 2000 Exklusive

Reviews:

Related manuals for N 2000 Exklusive

Brands by name

Popular brands