background image

10 

 

 

Turn continuously and brake safely having enough free space. 

 

Practice your first ride in an open area without obstacles. 

 

Never let distract your mind during riding. 

Foot position

 

 put your foot on the board as close to the front part as possible. Let your other foot on 

the  ground.  Make  sure  the  route  is  clean  and  free.  To  start  riding,  push  yourself  forwards  (like  on  a 
non-motorized  scooter).  Push  off  with  the  foot  that  is  on  the  ground.  Immediately  after  pressing  the 
throttle  downwards,  tilt  your  body  forwards  as  a  prevention  from  falling  back  while  increasing  your 
speed. Avoid excessive body pressing on the handlebars during speed changing. One foot is at front 
and the second one is back. It is comfortable to place the feet like on a skateboard for optimal stability. 

NOTE:

 Riding on a scooter can be dangerous. You use the product on your own responsibility and be 

familiar with all the safety precautions before riding. 

Turning

 

  it  is  the  same  as  on  a  surf  or  snowboard.  The  handlebar  should  be  parallel  to  the  body. 

Before turning look at the approaching direction to be sure the operation is safe. 

Braking

 

  shift  your  weight  backwards  so  that  the  braking  is  realized  through  your  feet  and  not 

through  handlebar  and  steering  system.  Learn  well  to  adjust  the  gravity  center  during  stopping  to 
avoid turning over or excessive wearing of the braking and steering system 

CLEANING AND MAINTENANCE 

 

The scooter must be switched off, disconnected from the charger and the charging port must 

be covered before cleaning or maintenance. 

 

Clean the scooter with a damp cloth and a mild detergent. 

 

Do not use solvents or other aggressive cleaning agents. 

 

Keep the water out of the charging port. 

 

Never immerse the scooter. 

 

Do not use high-pressure cleaners. 

 

If the tire pressure is low, inflate it. 

 

If  you  need  to  replace  tires  /  inner  tubes,  please  contact  your  specialist  dealer  or 

manufacturer. 

 

You can adjust the brake stiffness by loosening the M5 screw. Loosen the screw to the right, 

tighten it to the left. 

STORAGE 

 

Store in a dry and shady place. 

 

Avoid storage if the room temperature excee

ds 50 ° C.

 

 

Charge the battery at least once a month. Battery life is lower in cold conditions.

 

Summary of Contents for 23784














Reviews: