Page 4 of 34
PQ-132-U
1 General Information
1.2 Order number
PQ-132-U
1
- with programmable analogue output (±10 V differential output
or 4… 20 mA) and
analogue sensor interfaces
Extended versions
PPC-125-U-PDP
-
with programmable analogue output (±10 V differential output
or 4… 20 mA) and
analogue sensor interfaces, integrated
Profibus interface
UHC-126-U-PFN
-
with programmable analogue output (±10 V differential output
or 4… 20 mA) and
analogue sensor interfaces, integrated
Profinet interface
UHC-126-U-ETC
-
with programmable analogue output (±10 V differential output
or 4… 20 mA) and
analogue sensor interfaces, integrated
EtherCat interface
1.3 Scope of supply
The scope of supply includes the module plus the terminal blocks which are part of the housing.
The Profibus plug, interface cables and further parts which may be required should be ordered separately.
This documentation can be downloaded as a PDF file from
www.w-e-st.de
.
1.4 Accessories
WPC-300
- Start-Up-Tool (downloadable from our homepage
– products/software)
Any standard cable with USB-A and USB-B connector can be used as the programming cable.
1
Compared with older versions (ordering code
A
for voltages output and
I
for current output) the code
U
(universal) is
used for programmable outputs.
2
The number of the version consists of the hardware version (first two digits) and the software version (last two digits).
Because of the development of the products these numbers can vary. They are not strictly necessary for the order. We will
always deliver the newest version.
