Page 55 of 62
POS-124-U-PFN-2030
View of the block in FUP w/o interconnection:
Address designation for S7-300 / -400 (example):
8.2 STEP7
– classic
If controllers of the S7-300/-400 series are used, their programming can alternatively be
done using the “Si-
matic Manager
”.
First the GSDML
– file has to be imported in the HW – configurator.
Then create a Profinet
– system and choose the component „UNIGATE IC-Profinet 2Port“ from the catalogue
folder “PROFINET IO / Additional Field Devices” and add it to the Profinet-IO-System.
Then you can open up the device in the right window and take the element
„IN/OUT: 32 bytes“ from the “bidi-
rectional” subfolder and place it in the slot 1 of the device (window left / bottom).