W.E.S.T. Elektronik PAM-199-P, Technical Documentation Manual, Page: 16 / 48

Page 16 of 48 PAM-199-P 05.06.2020
4.3.6 Parameter list
Command Default Unit Description
FUNCTION 195 -
Defining functionality
LG EN -
Changing language help texts
MODE STD -
Parameter mode (standard or expert)
SENS AUTO -
Activation and deactivation of the monitoring functions
CCMODE OFF -
Activation and deactivation of the characteristic linearization
PIN:5 RDY -
Switching function of PIN 5
PIN:6 USCALE -
Switching function of PIN 6
USCALE 10000 0,01 %
Output current scaling depending on PIN:6
LIM 0 0,01%
Range of the input signal monitoring (e. g. detecting failures of joy-
sticks)
POL + -
Changing output polarity
AINA V -
Simple input switchover between current (4...20 mA) and voltage
(±10 V)
AIN:A A: 1000
B: 1000
C: 0
X: V -
Free scaling of the analogue input signal.
AA:1
AA:2
AA:3
AA:4 100
100
100
100 ms
ms
ms
ms
Four quadrant ramp times
CC:-10… +10 X Y -
Linearization function
MIN:A
MIN:B 0
0 0,01%
0,01 %
Zero-point adjustment / Compensation of the deadband
MAX:A
MAX:B 10000
10000 0,01%
0,01 %
Scaling of the maximum output signal
TRIGGER 200 0,01%
Trigger point for activating the MIN value
CURRENT 1000 mA
Nominal output current
DAMPL 500 0,01%
Dither amplitude
DFREQ 121 Hz
Dither frequency
PWM 2604 Hz
PWM frequency.
ACC ON -
Automatic adjustment of PPWM and IPWM parameters
PPWM
IPWM 7
40
-
-
Control parameter for the current control loop