Vzense DCAM560C, User Manual

Page: 18 / 46

18
4.2 DCAM560C Lite Interface
DCAM560C Lite is equipped with RJ45, LED, 6pin connector, IP reset button at the
back of its housing as shown in below figure.
For more information about pin assignments and connector types, see the following
sections.
Fig. 4.2: Camera Connectors
6pin Connector for DCAM560C Lite
The 6pin connector includes the one physical input signals and one physical output
signal, RS485 signal.
The pin assignments and pin numbering for the receptacle are as shown in below table.
The connector of the camera is a Molex receptacle, part number 535170630. The
recommended mating connector is a Molex plug, part number 511030600.
Pin Line Color Designation
1 BN RS485-A
2 GN RS485-B
3 WH Ext_Trigger
4 YE Exposure_timing
5 BK GND
6 RD Ext_OUT