Procedure to test for microphone transmit and audio output (Macintosh)
1. Under the Apple Menu select System Preferences
2. Choose System
3. Select Speech
4. Select Speech Recognition
5. Choose Settings
6. Select VXI USB 7.0
7. Click on Calibrate and follow the onscreen directions
8. Click Done
9. Quit System Preferences
FCC WARNINGS
This device complies with Part 15 of the FCC rules. Operation subject to the following two
conditions:
1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause
undesired operation.
Note: This equipment has been tested and found to comply with the limitations of a Class B digital
device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses, and can radiate, radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio and television reception. There is no
guarantee, however, that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to correct the interference by one or
more of the following measures:
- reorient or relocate the receiving antenna
- increase the separation between the equipment and receiver
- connect the equipment to an outlet on a circuit different from that to which the receiver is
connected
- consult the dealer or an experienced radio/TV technician for help
<DISCLAIMER>The user is cautioned that changes or modifications not expressly approved by
the party responsible for compliance could void the user's authority to operate the equipment.
All specifications and installation/usage procedures are subject to change without notice.
connecting people to a digital world.
VXI LIMITED WARRANTY
1. If your USB710 headset fails to work for any reason during the first year from the date of
purchase as shown by the purchaser's warranty registration, VXI will repair or replace the headset at
its election, free of charge. To register your VXI product, you may do so online at www.vxicorp.com
or by calling customer service at 800-742-8588. Without warranty registration, the warranty
period begins on the date of manufacture. Products returned to VXI after the one-year warranty
period will be repaired as "out of warranty" products, and purchaser will be billed for such
repairs pursuant to the Out-of-Warranty Repair provisions set forth below.
2. The obligations of VXI under this warranty shall be limited to repair or replacement (at our
option) of any part returned, freight pre-paid, to VXI. Returned products require a Return
Authorization that may be requested from VXI at 800.742.8588 or www.vxicorp.com.
3. THIS LIMITED WARRANTY IS IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE. Some jurisdictions do not permit the exclusion of implied warranties and the foregoing
exclusions may not apply to you.
4. In no event shall VXI be responsible for any other damages whatsoever including direct,
indirect, special, incidental, consequential or otherwise for breach of this or any other warranty,
express or implied.
OUT-OF-WARRANTY REPAIRS: VXI will repair out-of-warranty product for a charge that is
applicable as of the date of receipt by VXI. Call 1-800-742-8588 for current repair charges and
see return details above. Out-of-warranty repairs are warranted to be free from defects in
material and workmanship for ninety (90) days. Products returned to VXI for Out-of-Warranty
repairs, freight prepaid and with proper Return Authorization, will be return shipped to the
customer at VXI's expense.
VXI CORPORATION
One Front Street, Rollinsford, NH 03869
603-742-2888 Toll free 1-800-742-8588
website: www.vxicorp.com
2005 VXI Corporation PN202052A
VXI USB710 Headset
USER GUIDE
