Part number 20046, Rev 0
7
CONTROL CENTER - Temperature Monitor System
The temperature control center (monitor) system on the front of the unit provides the following
functions-
-
to provide an indication of the sample temperature inside of the compartment
-
to provide a local alarm at the unit in the event an out of range temperature exists
-
to provide the ability to connect remote systems to provide remote alarms or notifications
in the event of an out of range temperature.
-
to provide the ability to adjust setpoints, as well as program and test other parameters
associated with the alarm system (i.e. delay times, system status).
-
a battery backup, which will maintain the alarm system for several hours after a power
failure to allow for continued alarm and notification functions.
The temperature monitor system does NOT control the temperature of the unit
. That
function is performed by the Microprocessor Digital Temperature Control.
C
ONTROL
C
ENTER
P
ANEL
The LCD Display shows the temperature in ºC
•
In the event of a loss of power, the display shows a BAT message to indicate that the monitor
is
running on the battery. If the battery is low, the BAT message will blink.
The STATUS tricolor LED shows the status of the unit.
•
Green = normal run mode
•
Amber = program mode
•
Red = temperature is out of range
•
The light blinks off briefly each second to show the unit is active.
ALARM
MUTE/PROGRAM
UP button
DOWN button
STATUS tri-color LED
ALARM/TEST button
Alarm beeper
