5
EN
|
INSTRUCTION MANUAL
|
VWR
Bench stand
Recharging the Powerpette
Plus
Before starting to operate, carefully check mains voltage and recharge batteries.
To charge the Powerpette
Plus
:
Plug the charger jack (6) into the base of the Powerpette
Plus
.
•
Plug the charger (5) into a suitable wall socket. The red indicator on the charger will light up.
Place the Powerpette
Plus
onto bench stand.
•
Allow the unit to charge for 16 hours from empty to fully charged.
Once the Powerpette
Plus
is fully charged, the charger automatically switches to a trickle charge
operation and the indicator light turns green. If the charge to the Powerpette
Plus
is interrupted and
then re-started the charger will begin its 16 hour cycle and will switch to a trickle charge operation as
above. This will not damage the battery.
•
Only use the charger indoors and protect against moisture.
•
Recharging tempe10 °C to +35 °C.
Fitting the Powerpette
Plus
into the bench stand
The Powerpette
Plus
can be fitted into the bench stand in one of the two positions
shown. It can be charged in either position.
