VWR 620-2644, Quick Reference Manual

Page: 58 / 108

2 | About this documentation TD300 series
22 / 36 B-H86.0.0X.DKZ01-1.0
2 About this documentation
2.1 Purpose of the document
– This document is intended as a quick reference option.
– It does not replace the operating manual.
– For this reason, read the operating manual before operating the product for the
first time.
2.2 Warranty
VWR guarantees that this product will remain free from material and production de-
fects for a period of two (2) years from the time of delivery. If there is a defect, VWR
shall decide on its own discretion whether to repair or replace the product free of
charge or to provide the customer with a refund of the purchase price of the product,
insofar as it is sent back during the warranty period. This warranty shall be voided if
the product was damaged accidentally or intentionally due to improper use or nor-
mal wear. Insofar as the necessary maintenance tasks and inspections are not car-
ried out in accordance with the operating manual and the local requirements, the
warranty shall be voided, unless this omission is not causal for the defects of the
product.
The customer must insure returned articles against damage and loss. This warranty
is limited to the aforementioned rights. IT IS EXPRESSLY AGREED THAT THIS
WARRANTY APPLIES INSTEAD OF ANY WARRANTY OF FITNESS AND IN-
STEAD OF WARRANTY OF GENERAL MERCHANTABILITY.
2.3 Compliance with local laws and other legal regulations
The customer is responsible for obtaining the necessary official approvals and other
authorisations that are necessary for operation and use of the purchased product in
its place of use. VWR can only be held liable if the customer fails to carry out the ne-
cessary activities for this purpose or authorisations are not issued unless a corres-
ponding rejection is based on a defect of the product.
2.4 Further information
Software version of the product:
Link to the complete operating manual
htttp://www.vwr.com
http://www.conrad.com/downloads
For the exact product name, refer to the type plate on the rear side of the product.