VWR 471-1252 Instruction Manual Download

Page: 46 / 86

vwr.com I Instruction manual VWR

ULT Freezer 352/528 Eco Premium 02/2022

Page 46/86

13. General controller settings

The general settings can be accessed in the “

Settings

” submenu, which is available for users with “Service”

or “Admin” authorization level. It serves to enter date and time, select the language for the controller menus

and the desired temperature unit and to configure the controller’s communication functions.
The display of some network settings is available for all users in the “

Chamber

info

” menu.

13.1 Selecting the controller’s menu language

The controller communicates by a menu guide using real words in German, English, French, Spanish, and

Italian languages.
Required access level: “Admin”. Following start-up of the chamber (chap. 7), it is “User”.

Path:

Normal display Settings Chamber Language*

Following start-up of the chamber:

Sprache / Language / Langue / Idioma / Lingua

, depending on the

language selected before turning off the chamber

Press the

OK button

to enable the setting.

Setting the menu language (example: English).
The current setting flashes. Use the

arrow buttons

to select the de-

sired language.
Confirm the entry with the

OK button

Language

With the

arrow-down button (twice)

you can now change to the temperature unit setting.

With the

Back button

you can go back to the “

Chamber

” submenu and, repeatedly pressing it, to

Normal

display

13.2 Selecting the temperature unit

Required access level: “Admin”. Following start-up of the chamber (chap. 7), it is “User”.

Path:

Normal display Settings Chamber Temperature unit

Press the

OK button

to enable the setting.

Setting the temperature unit
The current setting flashes. Use the

arrow buttons

to select between

°C (degrees Celsius) and °F (degrees Fahrenheit).
Confirm the entry with the

OK button

Temperature unit

You can change the temperature unit between °C and °F.
If the unit is changed, all values are converted accordingly

C = degree Celsius
F= degree Fahrenheit

0 °C = 31 °F
100 °C = 212 °F

Conversion:
[value in °F] = [value in °C]

∗

1,8 + 32

With the

Back button

you can go back to the “

Chamber

” submenu and, repeatedly pressing it, to

Normal

display

Summary of Contents for 471-1252























































































Search results

Summary of Contents for 471-1252

Reviews:

Related manuals for 471-1252

Brands by name

Popular brands

VWR 471-1252, Instruction Manual

Search results

Summary of Contents for 471-1252

Reviews:

Related manuals for 471-1252

Brands by name

Popular brands