VWR 390-1335, Instruction Manual, Page: 28 / 61

Instruction Manual INCU-Line Premium
Page 28 / 61
5.8. Quick change of parameters
You cannot make a quick change (time / temperature) in a running program belonging to
another user.
Information about the program owner can be found on the bottom panel (Figure 8) .
5.8.1. Quick change the set temperature
In order to quickly change the value of the set temperature of the program, press the icon in main screen
(Figure 4) .
The value of the temperature should be selected by scrolling the list up or down (Figure 22) . Confirm the
change by pressing
Temperature cannot be lower than protection temperature (under tempe
rature) +2°C and higher than protec-
tion temperature (over temperature) -
2°C.
5.8.2. Quick change the set time
In order to quickly change the duration time of the program, press the icon in main screen ( Figure 4)
Select the number of days, hours and minutes by scrolling the list up or down ( Figure 23) . Confirm the
change by pressing . To set the continuous work press .
To change the way of displaying the time, press:
- to display the elapsed time
- to display the remaining time
Figure 22 - Quick change of temperature