VWR General Purpose Refrigerators and Freezers
Operation | 13
Replacing the Light Bulb for
25LCEEVWA
For refrigerator and freezers, LED lights are located at the top
of the compartment.
1. Unplug the refrigerator or disconnect power.
2. Remove the light shield on top of the refrigerator
compartment - Slide the light shield toward the back of
the compartment to release it from the light assembly.
Figure 2. Light bulb light shield
3. Replace the burned-out LED bulb(s) with a bulb of the
same size, shape and wattage.
Note:
Some LED replacement bulbs are not recommended
for wet/damp environments. The refrigerator and freezer
compartments are considered to be wet/damp environments.
If using a brand of LED bulb other than the recommended
LED bulb, before installation, read and follow all instructions
on the LED packaging.
4. Replace the light shield.
5. Plug in refrigerator or reconnect power.
Operation Instruction for
25LCEEVWA
The temperature controls are located at the top front of the
compartments for both refrigerator and freezer.
For optimum performance, follow the recommended settings
shown in the following figure.
Note:
Adjusting the refrigerator and freezer temperature
controls to a colder than recommended setting will not cool
the compartments any faster.
Freezer and Temperature
Control
Temperatures for freezer and refrigerator compartment can
be modified independently as desired. After setting the unit to
desired temperatures, allow 24 hours for temperature to
stabilize to the desired settings.
Figure 3. Control Panel (25LCEEVWA)
To Turn ON/OFF
Press both Minus Sign touch pads repeatedly until a dash (-)
appears in both the refrigerator and freezer displays. It will
turn off the unit and neither compartment will cool.
Defrosting
This freezer defrosts automatically and there should be no
significant frost build up in the freezer compartment.
During a defrost period, a thermostat will turn the defrost
heater off when all the ice has melted from the evaporator.
