Firmware update
MU 6100 H
84
ba77077e02
09/2014
15 Firmware update
Available firmware updates are provided on the Internet.
With the firmware update program and a PC you can update the firmware of the
MU 6100 H to the newest version.
For the update you have to connect the meter to a PC.
For the update via the USB interface, the following is required:
a free USB interface (virtual COM port) on the PC
the driver for the USB interface (on the enclosed CD-ROM)
the USB cable (included in the scope of delivery of the MU 6100 H).
After switching the meter off and on you can check whether the meter has taken
over the new software version (see Y
83).
1.
Install the downloaded firmware update on a PC.
An update folder is created in the Windows start menu.
If an update folder already exists for the meter (or meter type), the new
data is displayed there.
2.
In the windows start menu, open the update folder and start the firmware
update program.
3.
Using the USB interface cable, connect the MU 6100 H to a USB inter-
face (virtual COM port) of the PC.
4.
Switch on the MU 6100 H.
5.
In the firmware update program, start the update process with OK.
6.
Follow the instructions of the firmware update program.
During the programming process, a corresponding message and a
progress bar (in %) are displayed.
The programming process takes approx. three minutes. A terminatory
message is displayed after a successful programming process. The
firmware update is completed.
7.
Disconnect the MU 6100 H from the PC.
The MU 6100 H is ready for operation again.
Summary of Contents for MU 6100 H
