background image

OPERATIONS MANUAL

 

 

 
 

ONE POWERFUL PACKAGE 

 

V SERIES HDR

 

BROILERS

 

 
 

BASES 

 

VIR1SF - Standard Oven 

 

VIR1CF - Convection Oven 

 

VIR1BF - Cabinet Base 

 

VIR1F - Modular Broiler 
 

 

         **For Oven Operations and Installation Information refer 

to the “V Series HDR” Operations Manual F-37403

 

 

 

 

 

 

 

 

 

 

 

 

- NOTICE -

 

 

This manual is prepared for use by trained service technicians and 

should not be used by those not properly qualified. If you have 

attended a service school for this product, you may still be qualified to 

perform the procedures described in this manual. This manual is not 

intended to be all encompassing. If you have not attended a service 

school for this product, you should read, in its entirety, the repair 

procedure you wish to perform to determine if you have the necessary 

tools, instruments and skills required to perform the procedure. 

Procedures for which you do not have the necessary tools, 

instruments and skills should be performed by a trained service 

technician. 

 

 

 

 

 

 

For additional information on Vulcan- Hart or to locate an authorized parts and service 

provider in your area, visit our website at www.VulcanHart.com.

 

 

VULCAN-HART 

3600 NORTH POINT BLVD. 

 

DIVISION OF ITW FOOD EQUIPMENT GROUP, LLC 

BALTIMORE, MD 21222

 

 

 

 

WWW.VULCANHART.COM 

F-38215 (06-09) 

 

 

 

Summary of Contents for VIR1BF

































Reviews: