Vtronix
Using the mounting bracket base as a guide, mark two
mounting holes on the wall. Drill two mounting holes. Place
anchors (provided) into the holes until flush with the hole.
Position bracket on the wall and insert the wires from the
heating and cooling equipment through the wiring hole.
Holding the bracket in place on the wall, secure it to the wall
using mounting screws (provided). Mount thermostat to the
mounting bracket.
Color-coded 18-22 gauge wire is recommended for
wiring. All wiring must follow local electrical code.
Loosen the terminal screw on the thermostat, strip the
wire and connect the wire as shown in Fig. 5. Firmly
tighten terminal screw when finished. Follow wiring
diagram shown in Fig. 8.
For mounting thermostat directly on the wall (optional), drill
two mounting holes (4-5/16 inch apart). Place anchors into
the holes until flush with the hole. Tighten screws and place
the thermostat as Fig.3.
Put the cover back. See Fig. 6.
Lift and open the cover, pull it up to remove. See Fig. 4.
Tighten screw to secure the cover. See Fig. 7.
3
Fig. 5. Connect system wires to
thermostat terminals (strip 5/6 inch).
Fig. 3. Mounting thermostat
directly on the wall
Fig. 4. Remove the cover.
Fig. 2. Mounting bracket on wall.
Fig. 6. Put the cover back.
Fig. 7. Tighten the screw.
Mount and Wire the Thermostat
