X1|PHAUX2|A
UX3|TUN|AUX
4|AUX5|TAPE}
)
input.
>BALANCE
[{L|R|+|-}n]
For changing the channel
balance, or going directly
to a particular channel
balance setting.
Changes the channel balance in single
step increments (or decrements) and
outputs the new balance setting to the
RS-232 port
>PHASE [0|180]
For querying or setting
the phase setting of the
amplifier
Returns current phase setting.
>
FADE
For lowering volume
settings above 20 directly
to 20 in 1 step.
Returns >VOLUME 20
>TRIGGER
For programming triggers
1 and/or 2
Returns current trigger 1 and 2 settings,
in seconds after warmup, for example:
>TRIGGER 00/00
>BALANCED
[input][ON|OFF]
For toggling Inputs 1-3
between balanced and
single ended mode
Returns current balanced settings, for
example: >BALANCED: CD, AUX1
OFFSET [[+|-]n
For setting input offsets to
equalize volume between
inputs.
Returns current offset settings for
selected input, in degree of offset, for
example: >OFFSET -01
>UNITY
[input][ON|OFF]
For toggling between unity
gain settings and normal
settings of inputs 1 – 8.
If queried returns current unity inputs,
for example: >UNITY GAIN: AUX3
If queried on a particular input returns
that input’s unity setting, for example:
>UNITY GAIN: CD OFF
If commanded to set a particular input
for unity then returns current input’s
unity status, for example:
>UNITY GAIN: AUX4
>DISABLE
[input
]
For disabling unused
inputs.
Lists all disabled inputs, for example:
>DISABLED: CD
>ENABLE
[input]
For re-enabling previously
disabled inputs.
Lists all enabled inputs: >ENABLED:
CD,AUX1,PHAUX2,AUX3,TUN,AU
X4,AUX5,TAPE
TL5.5 SERIES II Preamplifier Owner’s Manual
VTL
38
Summary of Contents for TL5.5 Series II Signature
Page 1: ...VTL TL5 5 Series II Signature Preamplifier Owner sManual...
Page 3: ......
