VTI Instruments EX1000A, User Manual

Page: 33 / 320

www.vtiinstruments.com
EX10xxA Introduction 33
CJC7 55 28-31
CJC8 56 32-35
CJC9 57 36-39
CJC10 58 40-43
CJC11 59 44-47
CJC12 60 48-51
T
ABLE
1-3: CJC C
HANNEL
/ I
NPUT
C
HANNEL
R
ELATIONSHIP
Select the proper hardware filter
Unless the bandwidth of the sensor requires a higher instrument bandwidth, the 4 Hz setting of the
EX10xxA hardware filter should be used, as it provides the greatest immunity to external electrical
and magnetic interference.
Choose an appropriate sampling rate
For best instrument noise performance, the sampling rate should be set as low as the data collection
requirements allow. For more details, see
Sampling Rate / Noise Performance in Section 3.
Select the proper location
The EX10xxA unit should be located away from sources of high or low temperature, strong air
currents, and high magnetic fields. For more details, see Installation in Section 2
Use the correct wiring
Best results will be achieved with the shortest and largest thermocouple wire that the physical
requirements of the application can support. In addition, shielded thermocouples can be employed
to raise the system’s rejection of electrical interference. For more details, see
Input Connections /
Wiring in Section 2.