VTI Instruments Ametek EX1200A Series, User Manual

Page: 150 / 165

www.vtiinstruments.com
Appendix A 149
To use ACE, use the following steps:
1) Open ACE and click on the Add instrument toolbar.
2) Select Add LAN instrument on LAN and then click OK . ACE will search the network and
list the LXI instruments connected to the LAN.
F
IGURE
9-3: A
DD
I
NSTRUMENT
I
NTERFACE
3) To simply view the EX1200A web page, click on its webpage button. If desired, the
EX1200A can be added to ACE as a LAN instrument by enabling the appropriate
Select
checkbox and then clicking OK .
F
IGURE
9-4: A
CCESSING THE
EX1200A V
IA
ACE
L
OGIN INTO
SFP
EX1200A calibration is performed using the SFP web interface. If a password has been created for
the EX1200A mainframe, accessing an action or entry page for the first time during a session will
cause an
Error page will appear. To clear this error, click on the login link. The Login page will
appear. In the Password field, enter the configured instrument password. For additional
information, refer to the Web Page Operation discussion in Section 7 .
NOTE To reset the password to factory default, click the Change Password link in the left side menu.