background image

TELEPHONE LINE

CORD

WALL MOUNT BRACKET

BASE UNIT

HANDSET

 AC  ADAPTER

BATTERY PACK

Parts Check List:
1.  Handset
2.  Base Unit
3.  Telephone line cord
4.  AC adapter
5.  Battery Pack

6.  Wall mounting bracket

INTRODUCTION

IMPORTANT SAFETY INSTRUCTIONS

1. Remove the battery case by pressing on the

ridged lines and sliding downward.

2. Discard the old battery pack. Don't put the old

battery pack in a trash compactor or a fire - it
could burst.

Service at 1-800-595-9511.  Opening or
removing cabinet parts other than specified
access doors may expose you to
dangerous voltages or other risks. Incorrect
reassembling can cause electric shock
when the appliance is subsequently used.

11. Do not overload wall outlets and extension

cords as this can result in the risk of fire or
electric shock.

12. Unplug this product from the wall outlet:

a) When the power supply cord or plug is

damaged or frayed.

b) If liquid has been spilled into the product.
c) If the product has been exposed to rain

or water.

d) If the product does not operate normally

by following the operating instructions.
Adjust only those controls that are
covered by the operating instructions
because improper adjustment of other
controls may result in damage and will
often require extensive work to restore
the product to normal operation.

e) If the product has been dropped and

the cabinet has been damaged.

f)

If the product exhibits a distinct change
in performance.

13. Avoid using a telephone (other than a

cordless type) during an electrical storm.
There may be a remote  risk of electric
shock from lighting.

14. Do not use the telephone to report a gas

leak in the vicinity of the leak.

SAVE THESE  INSTRUCTIONS

When using your telephone equipment, basic
safety precautions should always be followed to
reduce the risk of fire, electric shock and injury
to persons, including the following:
1. Read and understand all instructions.
2. Follow all warnings and instructions marked

on the product.

3. Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol
cleaners. Use a damp cloth for cleaning.

4. Do not use this product near water (for

example, near a bath tub, kitchen sink, or
swimming pool).

5. Do not place this product on an unstable cart,

stand, or table. The product may fall, causing
serious damage to the product.

6. Slots and openings in the cabinet and the

back or bottom are provided for ventilation.
To protect it from overheating, these openings
must not be blocked by placing the product
on the bed, sofa, rug, or other similar surface.
This product should never be placed near or
over a radiator or heat register. This product
should not be placed in a built-in-installation
where proper ventilation is not provided.

7. This product should be operated only from

the type of power source indicated on the
marking label. If you are not sure of the type
of power supply to your home, consult your
dealer or local power company.

8. Do not allow anything to rest on the power

cord. Do not locate this product where the
cord will be abused by persons walking on it.

9. Never push objects of any kind into this

product through cabinet slots as they may
touch dangerous voltage points or short out
parts that could result in a risk of fire or electric
shock. Never spill liquid of any kind on the
product.

10. To reduce the risk of electric shock, do not

disassemble this product. If service or repair
work is required, contact VTech Customer

IMPORTANT: Do not dispose of this battery

in household garbage. For
information on recycling or
proper disposal, consult your
local solid waste collection or
disposal organization.

3. Place the new battery pack in the battery

compar tment. Make sure the metal
contacts on the underside of the battery
are aligned with charging contacts in
battery compartment.

4. Replace the battery cover by sliding it into

place.

5. The new battery pack must be charged

before using your telephone. Place the
handset in the cradle of the base unit to
allow it to charge for 24 hours. Maximum
battery life between charges is more than
5 hours of continuous talk time or 4 days
of standby.

CAUTION: To reduce the Risk of Fire or

Injury to Persons, Read and
Follow these instructions:

1. Use only VTECH battery.

2. Do not open or mutilate the battery.

Released electrolyte is corrosive and
may cause damage to the eyes or skin.
It may be toxic if swallowed.

VTECH

1

3

2

3. Exercise care in handling batteries in

order not to short the battery with
conducting materials such as rings,
bracelets, and keys.  The battery or
conductor may overheat and cause
burns.

4. Do not dispose of the battery in a fire.

The cell may explode.

REPLACING THE HANDSET BATTERIES

VT 9108/9105

USER’S MANUAL

900MHz CORDLESS TELEPHONE

VTECH COMMUNICATIONS LTD.

IMPORTANT

BEFORE USING YOUR NEW

PHONE, WE STRONGLY

RECOMMEND YOU READ THIS

MANUAL THOROUGHLY.

Print in China       91-5050-10-00

ISSUE 0

Summary of Contents for VT9105

Page 1: ...binet and the back or bottom are provided for ventilation To protect it from overheating these openings must not be blocked by placing the product on the bed sofa rug or other similar surface This product should never be placed near or over a radiator or heat register This product should not be placed in a built in installation where proper ventilation is not provided 7 This product should be oper...

Page 2: ...one pressing the REDIAL key will dial out the last number that was called on your phone It can also be used to store the last number dialed into the speed dial memory See Storing a Redial Number into Speed Dial for details TONE KEY In PULSE dialing mode this key is used to switch to Temporary TONE dialing mode VOLUME SWITCH There are three volume setting Low Medium and High BATTERY LOW WARNING BEE...

Page 3: ... base unit to the second or third floor or to some other location ToChangeorReplaceaSpeedDialNumber To change or replace a stored number in speed dial memory simply enter the new number and storeitinthememorylocationyouwishtochange For example to change the number stored in memoryposition7to555 1111 youwouldpress PROG 7 555 1111 MEM StoringPausesinMemory Toinsertapauseinaphonenumber pressand hold ...

Page 4: ... rights which vary from state to state IF YOU PURCHASED YOUR TELEPHONE IN CANADA Please call 1 800 267 7377 Ship to VTECH ELECTRONICS 200 7671 ALDERBRIDGE WAY RICHMOND BC V6X 1Z9 IC Industry Canada This telephone is registered for use in Canada Notice The Industry Canada label identifies certified equipment This certification means that the equipment meets certain telecommunications network protec...

Reviews: