Connect the power adapter to the camera unit
and a power supply not controlled by a wall
switch.
NOTES
Check the Wi-Fi coverage of your router. Place the
camera unit at a desired place.
To maintain compliance with the FCC’s RF exposure
guidelines, place the IP carmera at least 20cm from
nearby persons.
•
•
Set sound detection on/off:
Take photo or record video
Touch to take a snapshot of the current view.
Touch the video icon on the right below the live
view to switch to record video mode.
Touch to record a video of the current view.
Touch the camera icon will switch back to take
photo mode.
1.
2.
3.
4.
What’s in the box
Your camera package contains the following
items. Save your sales receipt and original
packaging in the event warranty service is
necessary.
6. Tab to select the Wi-Fi network, and then tab
Continue
.
7. When you have successfully added the
camera unit, tab
View Live Camera
to start
viewing.
TIP
If connection fails, press the
Pair
button on the bottom
of the camera unit for five seconds to reboot the camera,
and then add the camera again.
When the blue LED light starts blinking,
press and hold the
Pair
button on the bottom
of the camera unit for five seconds.
NOTES
The blue and red LED lights on the camera unit blink
alternately when pairing.
A “vtech connect“ user account can pair up to 20 IP
cameras.
5.
•
•
Motion detection
You can set the motion detection and/or sound
detection functions on. When the function is on,
the camera will record a video when it captures
movement or sound.
Set motion detection on/off:
Using the IP camera
Camera live view
Tab
Continue
.
Then, tab
Search for camera
.
3.
4.
Add
camera
Add IP Camera to your mobile app
Login
After you have downloaded “vtech connect“,
create an account and then login.
Add camera
After powering up the camera unit, wait for a
moment for it to warm up.
Tab
Add camera
.
1.
2.
Overview
1 – Light sensor
2 – Infrared LEDs
Backup lights for night vision.
3 – Camera lens
4 – LED indicators
5 – Microphone
6 – Power jack
•
Congratulations
on purchasing your new VTech product. Before
using this telephone, please read
Important
safety instructions
.
This manual has instructions on how to set up,
register and operate your new camera.
For support, shopping, and everything new at
VTech, visit our website at
www.vtechphones.com.
2.4GHz IP Wi-Fi Camera
User’s manual
Go to
www.vtechphones.com
to register your product for
enhanced warranty support and
latest VTech product news.
VC921
Connect
Connect the IP Camera
NOTES
Use only the camera power adapter supplied with
this product.
Make sure the electrical outlet is not controlled by a
wall switch.
The power adapter is intended to be correctly oriented
in a vertical or floor mount position. The prongs are not
designed to hold the plug in place if it is plugged into a
ceiling, under-the-table or cabinet outlet.
Make sure the camera unit and the power adapter
cord are out of reach of children.
Make sure you have set up an IEEE 802.11n
router (not included).
•
•
•
•
7 – Pair button
User’s
manual
Adjusting the camera angles
You can adjust the camera angles by panning or
tilting the camera head.
Night vision
The IP camera has infrared LEDs that allow you
to see the captured views clearly at night or in
a dark room. When the IP camera detects low
light levels, the infrared LEDs are switched on
automatically.
NOTE
When the infrared LEDs are on, the image is in
black and white. This is normal due to external
light sources.
