0
There is no dial tone.
Inspect the telephone line cord connection at the
telephone wall jack. Make sure the cord is connected
properly and securely.
Inspect the handset cord connections at both ends.
If the previous suggestions do not work, disconnect
the telephone base
from the telephone jack and
connect to a different telephone. If there is no dial
tone on that telephone either, the problem is in
your wiring or local service. Contact your telephone
service provider.
Telephone does not ring.
Make sure the
RINGER
switch on the side of the
telephone base is not set to
OFF
.
If there are other telephones on the same line, try
disconnecting some of them. Having too many
telephones connected can create problems such as
low ringer volume or impaired sound quality during
calls.
Dificulty storing numbers in memory.
Make sure you are pressing the correct sequence of
keys for storing numbers.
If you pause for over 10 seconds when programming
an entry, the procedure will time out and you will have
to begin again.
•
•
•
•
•
•
•
HELP
